H2O Scientific

• Pressure boosting of medium or large SPA pool and cleaning system of jetted bath tubs, spa pools.
• Water circulation in fishery.
• Decorative pool, water display, water processing.
• Weak corrosive liquid (weak acid and weak alkali without solid granules. Liquid temperature: <=50 degreeC.
• It is used for water circulation in swimming pools.
• Slightly dirty water with solids in suspension can be perfectly filtered.

Swimming Pool Pump : STP series pool pump is most maturely swimming pool pump and is approved by customer. The pump casing applied efficient structure design with max flow, max head and low noise. Cap and filter is easy to install and unload. Liquids part is made of high reinforce engineering plastic. Applied mechanical seal type ensure watertight in long-time continuous operation. The high reinforce engineering plastic base is vibration-resistance and corrosive-resistance. STP series is preferred product for sand filter and swimming pool.

Motor : Air cooling motor is suitable for Europe. The material of frame is aluminum; it is under low-noise and less-vibration and durability. Insulation class F, protection IPX5, continuous duty; Single-phase with thermal protector from T1 to ensure safety and convenience.

Application

Pressure boosting of medium or large SPA pool and cleaning system of jetted bath tubs, spa pools.

Water circulation in fishery.

Decorative pool, water display, water processing.

Weak corrosive liquid (weak acid and weak alkali without solid granules. Liquid temperature: <=50 degreeC.

It is used for water circulation in swimming pools.

Slightly dirty water with solids in suspension can be perfectly filtered.

Technical Characteristics
Model
Max Flow (L/min)
Max Head (m)
Voltage/Frequency (V/Hz)
Input Power
Amps
Fitting size(mm)
Kg
Packing Size (mm)
STP 150
430
16.5
220-240/50
1.1kw/1.5HP
5.8
60.30or63
14
605*305*350
STP 200
520
18
220-240/50
1.5kw/2.0HP
7
60.30or63
15.5
605*305*350
STP 300
635
19.5
220-240/50
2.2kw/3.0HP
10
60.30or63
18
630*305*350

Control box for pump control and underwater light with differential protection – single-phase.

IP-65 protection. Transparent glass with lock. Product is compatible with:

– 220/240V 1-phase (P+N+T) 50Hz/60Hz

24H master clock with ¼h steps. Connection for pump remote control (run/stop), the products are supplied with:

– Electric scheme.

– Connection diagram.

– Installation instructions.

– Gland for each cable input and output.

– Screws and stoppers (4) for wall installation.

The control box must be chosen according to the filtration pump nominal current: 

Magneto thermic protection (2 pumps: 1ª from 6 to 10A and 2ª from 2 to 10A) contactor, 24h program clock. 3 positions: Auto / 0 / Manual. 230V 10A protected output for lights. 12V 315VA protected output for 1 underwater light.

• Water Treatment Systems,
• Reverse Osmosis (RO)
• Industrial Circulation Systems
• Industrial & Domestic Water Supply
• Pressure Boosting and Distribution

• Cooling Water Circulation
• Washing

• Cast Iron
• AISI 431 
• SS (304/316L)
• Tungsten Carbide
• Thermoplastic

• All wetted components are corrosion proof. All components are suitable for potable water. Fitted with standard mechanical seal.
• Drive via standard electric motors.
• Additional bearing to take axial thrust in lantern. All cast iron components with CED Coating for long lasting corrosion protection.

• Tungsten Carbide, Carbon, EPDM, Viton

Feature

Whirlpool Bath Pump: WTC series hot tub spa pump is efficient and saving-energy product. Pump casing is volute design. Especially WTC-AB (Middle for inlet and side for outlet) improve the water performance and reduce the liquid noise. Liquids part is made of high reinforce engineering plastic; applied mechanical seal type ensure watertight in long-time continuous operation. The high reinforce engineering plastic base is vibration-resistance and corrosive-resistance. The liquid will be drained once motor is off.

Motor: Air cooling motor. The motor frame and base is conjoined that the Material is aluminium; Motor is under low-noise and less-vibration and durability that are specialized for hydro massage bathtub or spa pump. Insulation class F, protection IPX5, continuous duty; Single-phase with thermal protector from T1 to ensure safety and convenience. Pneumatic switch control is available.

Application

• it's suitable for hydro massage tube or spa system and circulation or filter of swimming pool system.
• it's used to transmit and cycle sea-water for fish pond water which is a preferred sea-water pump.
• Weak corrosive liquid (weak acid and weak) without solid granules. liquid temperature: +5-60
• it's suitable for circulating water equipment that use for workshop's cooling-down.

Pump Trolly

Features:

• Smooth movement
• Convenient to use
• Shinning and cutting edge finishing
• Very much durable material quality
• Tough and tensile
• Cost efficient
• Starter Panel for safety
• Self-priming Motor Pump (Optional)